I-LAB is İ-Klinik's own dental laboratory. Your crowns, bridges and full-arch restorations are designed, milled, shaded by hand and fired here — in the same building where they are fitted. Nothing is sent out.
The laboratory and the treatment room are in the same building. Your restoration does not travel.
The technician matches the colour against your own teeth in daylight, not against a photograph.
If something needs refining it goes back to the bench the same day — not onto a later trip.
Your mouth is scanned in 3D and the restoration is designed on screen before anything is cut.
CAD workstation · digital smile designThe approved design is milled from a solid disc of zirconia or ceramic.
redon WOOM milling unitEach unit is shaded by hand under magnification to match your own teeth.
GC Initial ceramics (Japan)The restoration is fired in a programmable porcelain furnace, one controlled cycle at a time.
UGIN artis neo furnace (France)You try it in, we adjust it here if needed, and your dentist fits it.
Same building, same dayEvery photograph on this page was taken in our own laboratory. If you would like to see it in person, you are welcome to walk through it while you are with us in İstanbul.
Milling
Shading
Firing
Finishing
Here is what sits on our bench and what goes into your mouth, by name.
Our CAD/CAM milling unit. It cuts the approved design out of a solid disc.
Our porcelain furnace. Every firing cycle is programmed and held to the degree.
The Japanese porcelain system our technician shades with.
Book a free consultation at one of our UK meet-ups and ask us anything about materials before you decide.